Browse by brands
Brands > Sevenoak
Precision Camera Stabilizer SK-W01N
Precision Camera Stabilizer SK-W01N

Features:

Lightweight and compact
Comfortable and flexible handle grip
Quick-release mounting plate
Rigid Aluminum and carbon fiber construction
Side-to-side trim screw
Fore-and-aft trim screw
Horizontal and vertical trim screw
Addable counterweight
Supports up to 2.2KG
 
The Sevenoak Precision Camera Stabilizer SK-W01N offers light, agile, seamless shooting for today's videographer. Designed in light and compact feature, the Sevenoak camera stabilizer SK-W01N allows you to keep up with the action more easily than ever, and "fly" almost anywhere the scene takes you--up and down steps, indoors and outside, through crowds etc with precise and elegant control. Its quick-release mount lets you instantly swap camera connections between your stabilizer and any tripod. The unique precision adjustment screws and addable counterbalancing weight can be precisely adjusted to balance your camera.
RM889.00
Stock available
more info
Sevenoak 23.6" Camera Slider (22 lb Payload)
Sevenoak 23.6" Camera Slider (22 lb Payload)

Sevenoak SK-LS60 Overview

Provided by third party:

The Sevenoak camera slider SK-LS60 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera slider SK-LS60 gives you great value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground.

Key Features
  • Sets up in minutes
  • Super-smooth glide rail
  • Super-smooth sliding plate with bearings
  • Tension adjustment/locking knob
  • Spirit level
  • Use on a tripod or on a flat surface with included feet
  • Adjustable and foldable feet
  • Creates high-quality production shots
  • Anodized aluminum construction
  • With 1/4" and 3/8" screw holes on the rail
RM461.00
Stock available
more info
Sevenoak 29.5" Heavy-Duty Camera Slider (33.1 lb Payload)
Sevenoak 29.5" Heavy-Duty Camera Slider (33.1 lb Payload)

Sevenoak SK-HD75 Overview

Provided by third party:

Sevenoak camera sliders are designed to give you the ability to create high-quality videos without over-extending your budget. It is equipped with heavy-duty aluminum construction, adjustable feet, 1/4" and 3/8" screw thread, precision bearings etc. It can be used standalone with the included feet whose height can be adjusted easily, or attached directly to tripod(s) with the built-in screw thread. With precision bearings built under the sliding plate, the camera motion is smoother and quieter than ever.

Key Features
  • Built with precision bearings
  • Moves smoothly and quietly
  • Heavy-duty aluminum construction
  • Can be used standalone or mounted on tripod(s)
  • Adjustable and foldable feet
RM739.00
Stock available
more info
Sevenoak 33.5" Camera Slider (15.4 lb Payload, Black)
Sevenoak 33.5" Camera Slider (15.4 lb Payload, Black)

Sevenoak SK-LS85 Overview

Provided by third party:

The Sevenoak camera slider SK-LS85 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera slider SK-LS85 gives you great value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground.

Key Features
  • Sets up in minutes
  • Super-smooth glide rail
  • Super-smooth sliding plate with bearings
  • Tension adjustment/locking knob
  • Spirit level
  • Use on a tripod or on a flat surface with included feet
  • Adjustable and foldable feet
  • Creates high-quality production shots
  • Anodized aluminum construction
  • With 1/4" and 3/8" screw holes on the rail
RM553.00
Stock available
more info
Sevenoak 33.5" Curved Camera Slider (11 lb Payload)
Sevenoak 33.5" Curved Camera Slider (11 lb Payload)

Sevenoak SK-CS02 Overview

Provided by third party:

The Sevenoak Camera Curved Slider SK-CS02 is a series curved sliders specially designed to give you the ability to create high-quality shoots and videos without over-extending your budget. Featuring heavy-duty anodized Aluminum construction, super smooth glide rail and roller bearing sliding plate, 1/4" screw thread, and four included feet. Sevneoak Curved tracking system give you the best value. With different bending angle, Sevenoak curved tracking system allows you to focus on an object from different angle and capture better image.

Key Features
  • Heavy-duty aluminum construction
  • 1/4" screw thread
  • Compatible with most SLR cameras, compact cameras, 4/3 cameras
  • Super smooth glide rail and roller bearing sliding plate
  • Four included feet for standalone use
  • Compatible with smart phones when an adapter is attached 1/2 circle
RM1,016.00
Stock available
more info
Sevenoak 39.4" Heavy-Duty Camera Slider (22 lb Payload, Black)
Sevenoak 39.4" Heavy-Duty Camera Slider (22 lb Payload, Black)

Sevenoak SK-HD100B Overview

Provided by third party:

Sevenoak camera sliders are designed to give you the ability to create high-quality videos without over-extending your budget. It is equipped with heavy-duty aluminum construction, adjustable feet, 1/4" and 3/8" screw thread, precision bearings etc. It can be used standalone with the included feet whose height can be adjusted easily, or attached directly to tripod(s) with the built-in screw thread. With precision bearings built under the sliding plate, the camera motion is smoother and quieter than ever.

Key Features
  • Built with precision bearings
  • Moves smoothly and quietly
  • Heavy-duty aluminum construction
  • Can be used standalone or mounted on tripod(s)
  • Adjustable and foldable feet
RM923.00
Stock available
more info
Sevenoak 47.2" Camera Slider (11 lb Payload)
Sevenoak 47.2" Camera Slider (11 lb Payload)

Sevenoak SK-LS120 Overview

Provided by third party:

The Sevenoak camera slider SK-LS120 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera slider SK-LS120 gives you great value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2" off the ground.

Key Features
  • Sets up in minutes
  • Super-smooth glide rail
  • Super-smooth sliding plate with bearings
  • Tension adjustment/locking knob
  • Spirit level
  • Use on a tripod or on a flat surface with included feet
  • Adjustable and foldable feet
  • Creates high-quality production shots
  • Anodized aluminum construction
  • With 1/4" and 3/8" screw holes on the rail
RM647.00
Stock available
more info
Sevenoak 47.2" Heavy-Duty Camera Slider (17.6 lb Payload, Black)
Sevenoak 47.2" Heavy-Duty Camera Slider (17.6 lb Payload, Black)

Sevenoak SK-HD120B Overview

Provided by third party:

Sevenoak camera sliders are designed to give you the ability to create high-quality videos without over-extending your budget. It is equipped with heavy-duty aluminum construction, adjustable feet, 1/4" and 3/8" screw thread, precision bearings etc. It can be used standalone with the included feet whose height can be adjusted easily, or attached directly to tripod(s) with the built-in screw thread. With precision bearings built under the sliding plate, the camera motion is smoother and quieter than ever.

Key Features
  • Built with precision bearings
  • Moves smoothly and quietly
  • Heavy-duty aluminum construction
  • Can be used standalone or mounted on tripod(s)
  • Adjustable and foldable feet
RM1,247.00
Stock available
more info
Sevenoak Cage For Panasonic GH3, GH4,GH5
Sevenoak Cage For Panasonic GH3, GH4,GH5

DESCRIPTION

The Sevenoak SK-GHC5 Camera Cage for Panasonic GH5 is a great solution of adding protection, stability to your DSLR camera, through its aluminium construction. Photographers and Videographers will appreciate the robustness & HDMI plug protector; and the full access to all the camera’s controls, buttons, memory card slot and battery.

This is a great way of allowing you to attach all your additional accessories such as microphones, LED lights and monitors, all through one platform as it features built-in cold shoes, 1/4” and 3/8” mounting points. Additionally, the cage is designed to attach easily to the quick release plate and 15mm standard support rods.

RM1,061.00
Stock available
more info
Sevenoak Cage Kit for Blackmagic Pocket Cinema Camera
Sevenoak Cage Kit for Blackmagic Pocket Cinema Camera

Sevenoak SK-BPC10 Overview

The Sevenoak Cage Kit for Blackmagic Pocket Cinema Camera is an aluminum cage and rod system built specifically for the Blackmagic Pocket Camera (camera not included). It consists of the cage, which is formfitting and allows unobstructed access to the camera's features, connectors, battery, and SD card slot. The cage provides 1/4"-20 and 3/8"-16 accessory mounting points that enable you to mount available accessories without stressing the camera body.

Once the camera is mounted on the cage, the included HDMI plug protector connects the included micro-HDMI to HDMI cable to the camera's micro-HDMI port and is clamped in place, providing a full-sized HDMI connector. This makes it easier to connect HDMI cables, and you don't have to worry about wearing out or damaging the micro-HDMI port by repeatedly plugging and replugging a micro-HDMI cable into your camera body. The HDMI plug protector clamps the micro-HDMI adapter cable in place and attaches to the cage itself, acting as a strain relief and providing a platform for the full-sized HDMI connector to attach, so it doesn't just dangle freely.

The cage features an integrated wood grip for user comfort, as well as a removable top handle that features accessory mounting points and two cold shoes. The cage also includes a 15mm LWS support rod system featuring rod clamps, a pair of 11.8" threaded rods, and three 1/4"-20 threaded helical coil inserts for attaching the rod support system to an available QR/sliding baseplate, tripod, or other 1/4"-20 mounting equipment.

The cage attaches to the included 15mm LWS support rods via a quick release system that allows you to easily remove the camera from the rods for a minimum-sized shooting package, or quickly remount the camera to the rods when working with rod-mounted accessories. The design of the system ensures that the lens' center height to the rods conforms to industry standards for using rod-mounted accessories.

  • Formfitting cage.
  • Functions and features of the camera remain available for use.
  • Top handle features two unpowered accessory shoe mounts, one forward-facing and one top-mounted.
  • Numerous 1/4"-20 and 3/8"-16 threaded accessory mounting points.
  • 15mm LWS support rod system.
RM923.00
Stock available
more info
Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7R II, and a9
Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7R II, and a9

Sevenoak SK-A9C1 Overview

The Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7R II, and a9 is an aluminum cage and rod system built for the Sony a9 and a7 series of cameras. It consists of the formfitting cage which allows for unobstructed access to the camera's features, connectors, battery, and SD card slot. The cage provides 1/4"-20 and 3/8"-16 accessory mounting points that enable you to mount available accessories without stressing the camera body.

Once the camera is mounted on the cage, the included HDMI plug protector connects the included micro-HDMI to HDMI cable to the camera's micro-HDMI port and is clamped into place, providing a full-sized HDMI connector. This makes it easier to connect HDMI cables, and you don't have to worry about wearing out or damaging the micro-HDMI port by repeatedly plugging and replugging a micro-HDMI cable into your camera body. The HDMI plug protector clamps the micro-HDMI adapter cable in place and attaches to the cage itself, acting as a strain relief and providing a platform for the full-sized HDMI connector to attach, so it doesn't just dangle freely.

The cage features an integrated wood grip for user comfort, as well as a removable top handle that features accessory mounting points and a cold shoe. The cage also includes a baseplate with 15mm LWS support rod clamps and a pair of 11.8" threaded rods.

The included dovetail plate mounts to your camera and interfaces with the included quick release system that allows you to easily remove the camera from the rods for a minimum-sized shooting package, or quickly remount the camera to the rods when working with rod-mounted accessories. The design of the system ensures that the lens' center height to the rods conforms to industry standards for using rod-mounted accessories.

  • Formfitting cage.
  • Functions and features of the camera remain available for use.
  • Top handle features two unpowered accessory shoe mounts, one forward-facing and one top-mounted.
  • Numerous 1/4"-20 and 3/8"-16 threaded accessory mounting points.
  • 15mm LWS support rod system.
RM1,155.00
Stock available
more info
Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7S II & a7R II
Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7S II & a7R II

Sevenoak SK-A7C1 Overview

The Sevenoak Camera Cage Kit for Sony a7, a7S, a7R, a7 II, a7S II & a7R II is an aluminum cage and rod system built for the Sony a7 series of cameras. It consists of the cage, which is formfitting and allows for unobstructed access to the camera's features, connectors, battery, and SD card slot. The cage provides 1/4"-20 and 3/8"-16 accessory mounting points that enable you to mount available accessories without stressing the camera body.

Once the camera is mounted on the cage, the included HDMI plug protector connects the included micro-HDMI to HDMI cable to the camera's micro-HDMI port and is clamped into place, providing a full-sized HDMI connector. This makes it easier to connect HDMI cables, and you don't have to worry about wearing out or damaging the micro-HDMI port by repeatedly plugging and replugging a micro-HDMI cable into your camera body. The HDMI plug protector clamps the micro-HDMI adapter cable in place and attaches to the cage itself, acting as a strain relief and providing a platform for the full-sized HDMI connector to attach, so it doesn't just dangle freely.

The cage features an integrated wood grip for user comfort, as well as a removable top handle that features accessory mounting points and two cold shoes. The cage also includes a baseplate with 15mm LWS support rod clamps and a pair of 11.8" threaded rods.

The included dovetail plate mounts to your camera and interfaces with the included quick release system that allows you to easily remove the camera from the rods for a minimum-sized shooting package, or quickly remount the camera to the rods when working with rod-mounted accessories. The design of the system ensures that the lens' center height to the rods conforms to industry standards for using rod-mounted accessories.

  • Formfitting cage.
  • Functions and features of the camera remain available for use.
  • Top handle features two unpowered accessory shoe mounts, one forward-facing and one top-mounted.
  • Numerous 1/4"-20 and 3/8"-16 threaded accessory mounting points.
  • 15mm LWS support rod system.
RM1,155.00
Stock available
more info
Sevenoak Camera Stabilizer with Built-In Microphone MicRig Stereo
Sevenoak Camera Stabilizer with Built-In Microphone MicRig Stereo

Sevenoak MICRIG STEREO Overview

Capture steady shots and enhanced sound with the Camera Stabilizer with Built-In Microphone MicRig Stereo from Sevenoak, designed to work with DSLRs, camcorders, GoPros, and smartphones. By combining a stereo microphone with a compact handheld stabilizer, this device effectively reduces the weight of your setup, enabling for longer and better shoots. The MicRig also offers the versatility of a low-angle grip and a top-mounted universal cold shoe for attaching accessories such as LED lights and LCD monitors. Included are three audio output cables for connecting your GoPro, smartphone, or DSLR.

RM277.00
Stock available
more info
Sevenoak Carbon Fiber Slider Pro
Sevenoak Carbon Fiber Slider Pro

Sevenoak SK-TXS80 Overview

Create cinematic camera movements with 22" of travel when using the Sevenoak Carbon Fiber Slider Pro. It features a belt-drive with flywheel system and offers adjustable resistance via two additional bearings on the carriage. The carriage also features a locking knob to hold it in place on the rails. For tripod and stand usage, there are standard 1/4"-20 and 3/8"-16 threads on the bottom, as well as a 5/8" stand mount receiver built-into the removable track ends (tube fixers).

The flywheel adds inertia to your slider, providing smooth starts and stops. It features a removable handle so you can either "crank" the flywheel or spin it without the handle to drive the slider. In addition, you can easily remove the flywheel if you wish to move the slider without the flywheel. The carbon fiber rails feature threaded ends that enable extending the length by attaching extension rails (not included). The outrigger feet are mounted on the track ends and are individually adjustable for leveling the slider on uneven surfaces.

Key Features
  • 22" of slider travel
  • Supports up to 22 pounds of payload
  • Flywheel belt-drive system
  • Adjustable resistance
  • 1/4"-20 and 3/8"-16 tripod threads
  • 5/8" stand mount receivers for C-stands and baby stands
  • Individually adjustable outrigger feet
  • Adjustable rollers help minimize lateral movement for heavier rigs
RM1,847.00
Stock available
more info
Sevenoak Dolly Slider
Sevenoak Dolly Slider

Sevenoak SK-DS60 Overview

This Sevenoak Dolly Slider features adjustable-height feet and removable wheels for creating free-form dolly or tracking shots. The track consists of a single-piece construction of the track bed and rails, with removable track stops/ends that incorporate the adjustable-height feet and wheels. The carriage glides on roller bearings along the track rails and has up to 23" of travel.

The carriage features four roller bearings and a friction brake that holds the position of the carriage on the track. The carriage also incorporates a bubble level, enabling you to confirm the level of the system. The track bed features 3/8"-16 threaded mounting holes, enabling you to mount the track on a tripod head and providing additional mounting possibilities and angles.

  • The track bed features 3/8"-16 threaded tripod mounting holes. This enables mounting the slider onto a tripod and then using the head to create shots that can vary from horizontal to vertical.
  • The feet enable setting up the slider track on a surface; the height of each foot can be adjusted up to 2" to level the track.
  • The wheels can be used to create curved moves on a flat and smooth surface, and are removable so the slider can be used conventionally.
  • The carriage features a 1/4"-20 threaded stud for mounting a tripod head or your camera directly onto the carriage.
  • The carriage also incorporates a bubble level and two each 1/4"-20 and 3/8"-16 threaded accessory mounting holes.
RM553.00
Stock available
more info
Sevenoak Electronic Pan and Tilt Head Pro
Sevenoak Electronic Pan and Tilt Head Pro

Sevenoak SK-ECH04 Overview

The Sevenoak Electronic Pan and Tilt Head Pro is a remotely operated head that offers continuous 360° rotation on both the horizontal and vertical axes. It offers wired joystick remote control from up to 20 ft away. The head supports 22 pounds of camera payload and features vertical and side-to-side adjustment for balancing your camera on the head. The unit comes with a wall-mounted AC adapter that provides 12 VDC and supports up to a 2A draw, which means you could use a professional battery (not included) to power the head.

The head has a sliding camera plate that enables front-to-back balance adjustment and makes mounting and unmounting your camera easy. The bottom of the head offers 3/8"-16 and 1/4"-20 mounting threads for attaching to tripods, jibs, and other equipment. The remote-control box features a joystick and direction switches, as well as LED indicator lights. You can control the speed of the head from 0.5 to 3.3 rpm. An included bracket enables mounting the control box to jibs and cranes.

Key Features
  • Pan and tilt your camera from up to 20 ft away
  • 360° continuous pan rotation
  • 360° continuous tilt rotation
  • Smooth and quiet high-torque DC motors
  • Wired joystick remote control with adjustable speeds
  • 22 lb payload
  • Sliding camera plate
  • 3/8"-16 and 1/4"-20 mounting threads on the bottom
  • Carry case included
RM2,769.00
Stock available
more info
Sevenoak Lightweight Carbon Fiber Camera Slider (31.5")
Sevenoak Lightweight Carbon Fiber Camera Slider (31.5")

Sevenoak SK-CFS80 Overview

This Sevenoak Lightweight Carbon Fiber Camera Slider is a lightweight easy-to-position slider which can support loads up to 15.4 pounds. The large carriage features a 3/8"-16 mounting screw that accommodates fluid heads of various sizes. It glides smoothly along the 18mm rails and features four guide rollers that ride along the outside of the rails. Two additional rollers press against the inside and allow you to adjust the tension of the carriage.

In addition to a 3/8"-16 mounting screw, there are two sets each of 1/4"-20 and 3/8"-16 threads on the carriage that are useful for mounting optional accessories. At the ends of the slider are angle-adjustable legs with height-adjustable rubber feet for leveling on uneven terrain. The carbon fiber slider rails are threaded and accept extension rails (not included), enabling you to extend the length of your slider. A padded carrying case is included for storage and transport.

Features
  • Durable and lightweight construction
  • 18mm carbon fiber rails
  • 15.4 lb load capacity
  • Large camera carriage
  • Four precision-sealed bearings on aluminum rollers guide the carriage along the rails
  • Two roller bearings on a rotating platform on the underside of the carriage are used to provide adjustable tension to regulate the speed of the slider
  • Mounted on the side of the carriage is a knob that tightens and holds the carriage in place
  • 1/4"-20 and 3/8"-16 accessory mounting threads on carriage
  • The carriage incorporates a bubble level
  • Adjustable outrigger legs for leveling
  • Center-mounting platform accepts 1/4"-20 and 3/8"-16 mounting studs, such as can be found on tripods or light stands
  • The end blocks each feature 1/4"-20 and 3/8"-16 threaded mounting holes for accepting supports
  • The integrated spring-loaded feet rotate on a rosette system so you can level the slider, tighten the legs, and not worry about the legs slipping
RM923.00
Stock available
more info
Sevenoak Mechanical Ball Head
Sevenoak Mechanical Ball Head

The Sevenoak SK-EBH60 Panoramic Time Lapse Tripod Head is a portable mechanical panoramic head that provides an ideal solution for creating time-lapse videos or panoramic stills with GoPro/action camera, smart phone and DSLRs around 2kg. It includes a 1/4"-20 camera screw on top and a 3/8” to 1/4"-20 socket at the bottom for a tripod, and it can also be used directly on a tabletop or other flat surface.

  Based on a simple timer mechanism that needs no batteries, the SK-EBH60 Tripod Head is capable of panning 360° counterclockwise in 60 minutes. For clockwise panning you can hang the unit upside down, although this is only recommended for GoPro/action camera, smart phone or cameras weighing less than 1 lb. To double the panning speed, you can stack two units together.

Features:

  • Compatible with GoPro, smart phones, 4/3 cameras and light weight DSLRs
  • Compact and portable
  • Easy to use
  • Can be used standalone, on tripods or sliders
  • Useful for panorama shooting and time lapse
  • Max load capacity: 2 KG
RM86.00
Stock available
more info
Sevenoak Mid-Cam Stabilizer
Sevenoak Mid-Cam Stabilizer

The Sevenoak SK-SW02N Version 1 Medium Handheld Stabilizer Pro for DSLR Cameras is a lightweight stabilizer, hand-held camera stabilizer system designed for DSLR cameras weighing up to 3KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs. The camera platform moves back and forth and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera's vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.

PRODUCT OVERVIEW

  • Fine adjustment Camera Balance Platform

  • Integrated quick-release Camera Plate

  • Adjustable convergence, precision, three axis gimbal

  • Adjustable dynamic balance and inertial control Base Platform

  • Made For DSLR, Made For Small Camcorder

  • Handheld Support Rig

RM889.00
Stock available
more info
Sevenoak Mini Action Stabilizer
Sevenoak Mini Action Stabilizer

Overview

Sevenoak Mini Action Stabilizer SK-W08 is a compact, ultra-light camera stabilizer that uses counterweights and gimbal to help you keep your camera steady when shooting video---eliminating distracting camera movement for smoother, more professional-looking movies. It features that a super-smooth gimbal and adjustable counterweight help keep the camera balance and stable, and a built-in bubble Spirit level to check the camera's balance. A comfortable padded hand grip minimizes fatigue when shooting with SK-W08.
The Sevenoak SK-W08 Handheld Stabilization allows shake-free handheld shots, easily and with minimal fatigue. Designed specifically for lightweight mirrorless cameras or compact camcorders up to 1.5 lbs. Mount camera and be ready to shoot in just minutes.The Sevenoak SK-W08 Handheld Video Stabilization lets you achieve professional results for still shots, panning, moving in and out on subjects and more. Take the step up from hobbyist to professional without the expense. Perfect for outdoor action, long shoots, artistic applications and more.
The ball joint gimbal design is optimized for smooth function and ease of use; it effectively isolates the rig from user movement, allowing jiggle- and jitter-free shooting. Counterweights are adjustable for precise handling and customized performance. Use the Sevenoak SK-W08 Handheld Video Stabilization System effectively with one hand without tiring, or use two hands for kinetic situations and max control.

Features
1) Stabilizes camera to minimize camera shake and reduce fatigue
2) Super-smooth gimbal
3) Adjustable counterbalance weights
4) Built-in Bubble Spirit level
5) Compatible with Gopro and other action cameras
6) Compatible with smartphones by adding other mounting devices
7) Maximum weight capacity: 0.5 KG

RM177.00
Stock available
more info
Sevenoak Mini Ball Head
Sevenoak Mini Ball Head

Sevenoak Small Ball Head SK-H1 is a small ball head which enables users to mount various kinds of useful cameras or accessories with 1/4"-20 screw.The 360°rotatable and tiltable Ball-and-socket joint maximize pan-and-tilt flexibility to take the best shoots.

Product Highlights :

  • Weights: 71g
  • Supports loads: up to 5kg
  • Dimensions: 29*48*54mm(L*W*H)
  • Lightweight,supports loads up to 5kg
  • Solid Aluminum construction
  • Up to 90° Portrait Angle Tilt
  • 360° Rotation with locking knob
  • 1/4″-20 Mount on the top
  • Compatible with tripods or support systems that features a 1/4″-20, 3/8″-16 mount,or cold shoe.

RM128.00
Stock available
more info
Sevenoak Mini Handheld Carbon Fiber Stabilizer
Sevenoak Mini Handheld Carbon Fiber Stabilizer

Sevenoak SK-SW PRO 1 Overview

The Sevenoak Mini Handheld Carbon Fiber Stabilizer is a carbon fiber mini stabilizer for loads up to 5.5 lb. It works by mechanical balancing and does not use batteries. Measuring just over 11.5" in height, it provides a portable solution for capturing stable moving shots. The stabilizer works by balancing your camera in relation to the removable sets of counterweights. Each set of counterweights is adjustable in steps between 1.3 to 8.2 ounces. The counterweights attach in a 3-leg arrangement, allowing the stabilizer to stand on its own on a flat surface when balanced.

The camera platform accepts an included sliding baseplate that allows for balance adjustment in one axis. The platform itself allows you to adjust the camera's position perpendicular to the sliding baseplate for balance in a second axis. The length of the pole can be adjusted by approximately four inches, enabling you to adjust the distance between your camera and the counterweights for balance in a third axis. A, attached soft handgrip enables you to handle and control the stabilizer while shooting.

Key Features
  • Carbon fiber 3-axis mini stabilizer
  • Supports loads up to 5.5 pounds
  • Collapsed size of 11.5"
  • Three sets of counterweights
  • 3-leg structure allows for use as a tripod
  • Soft handle
  • Universal camera plate included
RM988.00
Stock available
more info
Sevenoak Mini Shoulder Support Camera Rig
Sevenoak Mini Shoulder Support Camera Rig

Sevenoak SK-VC01 Overview

The Sevenoak Mini Shoulder Support Camera Rig is designed for the run-and-gun style of video shooting. The lightweight support helps enable smooth camera movements with a familiar shoulder-mounted style which provides a point of stability, as opposed to supporting the camera with only your arms. Weighing less than three pounds, the rig's lightweight and ergonomic design helps reduce fatigue for prolonged use while supporting up to 22 pounds of camera and accessories.

The shoulder support pad can be mounted on either side of the camera support allowing you to adjust the rig for comfort or left-/right-shoulder use. The foam-covered handle can also be detached for use as a standalone support for lightweight cameras.

Key Features
  • Stabilizes camera for smooth camera movements
  • Suitable for DSLRs and mirrorless cameras
  • Supports up to 11 pounds
  • Adjustable for left- and right-shoulder use
  • Detachable foam-padded handle
  • Rubberized camera platform with 1/4"-20 mounting screw
  • An optional Counterweight Balance Keeper can be mounted to the shoulder support
RM247.00
Stock available
more info
Sevenoak Mini Tripod
Sevenoak Mini Tripod

Sevenoak SK-T1 Overview

Keep your camera steady with this Mini Tripod from Sevenoak. This aluminum tripod is lightweight at 10.8 oz, yet sturdy enough to hold objects up to 11 lb. The tripod also comes with an adjustable extension tube and a 360° ball head mount for greater creative freedom.

RM247.00
Stock available
more info
Sevenoak Mini-Cam Stabilizer
Sevenoak Mini-Cam Stabilizer

The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.

  The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera's vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.
 

Features:

  • Fine adjustment Camera Balance Platform
  • Integrated quick-release Camera Plate
  • Adjustable convergence, precision, three axis gimbal
  • Adjustable dynamic balance and inertial control Base Platform
RM791.00
Stock available
more info