Home > Products > Accessories & Support
Sort byShowper page
Libec 165' CABLE5000 Control Cable for REMO30 Remote Head

Libec CABLE 5000 Overview

The LANC 165' CABLE5000 Control Cable from Libec is designed to control the pan/tilt movement of the REMO30 Remote Head.

  • Ensures transmission of signal images
RM1,461.00
Stock available
more info
iFootage Track for Shark Slider Mini
  • Precision engineered
  • Lightweight and supremely agile
  • Manual or automated motion camera system
  • Designed for travel
  • Toolless system
  • Payload: 10 kg (short length); 8 kg (long length)
RM415.00
Stock available
more info
Libec 5m/16.5' Control Cable for Head, LANC and Monitor

The Libec 5 m/16.5 ft control cables can be connected to extend up to 30 m/99 ft in length.

RM392.00
Stock available
more info
Libec 75mm Tripod Mount Adapter with Bowl Clamp

Libec BL-75R Overview

The BL-75 from Libec is a 75mm tripod mount adapter with a bowl clamp that can be used with the Libec slider rails ALX SR4, ALX SR8, and ALX SR12 (sold separately). It has a dual-base design consisting of a 75mm ball base and a flat base bottom. The flat base, featuring a 3/8"-16 mounting thread, can be used for attaching the head to various other flat-base gear. Compatible with the Libec ALX T and other 75mm ball-diameter and flat-base tripods, it fits sliders, skater dollies, and other equipment.

  • Dual-base design with 75mm ball base and a flat base bottom with a 3/8"-16 mounting thread
  • Designed for both 75mm ball-diameter and flat-base tripods
  • Made to fit sliders, skater dollies, and other equipment
  • Can be used with slider rails ALX SR4, ALX SR8, and ALX SR12
RM283.00
Stock available
more info
Libec A-9EX Sony PMW EX to Fujinon ENG Lens Adapter for Zoom Control

Libec A-9EX Overview

The Libec A-9EX Sony PMW EX to Fujinon ENG Lens Adaptor for Zoom Control is a conversion adapter that allows you to connect and gain zoom access to Fujinon's ENG lenses using a Sony PMW-EX camera.

  • For use with a Fujinon ENG lens and a Sony PMW EX camera
RM205.00
Stock available
more info
Libec A12P 12-pin Adapter Cable

Libec A-12P Overview

The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector.

RM440.00
Stock available
more info
Libec AD75 Adapter for Use With 75mm Heads and 100mm Tripods

Libec AD-75 Overview

The Libec AD75 adapter is for 75mm Libec fluid heads when used with 100mm Libec tripods.

RM148.00
Stock available
more info
Libec ALX H Dual-Base Fluid Head

Libec ALX H Overview

Compatible with both flat and ball-base hardware, the Libec ALX H Fluid Head is a versatile tripod head for video production. The ALX H base features a standard 75mm ball-base with a flattened area containing a standard 3/8"-16 threaded hole for mounting to standard flat-mount hardware found on compact sliders and other grip equipment. The pan and tilt fluid-drag mechanisms are fixed-strength, as is the counterbalance. The head's construction allows for a wide +90° (down)/-80° (up) tilt range. Each axis can be locked down for extra stability during stationary shots. Both sides of the tripod head feature rosettes for attaching the included pan handle on the desired side. The camera connects to the included sliding snap-in plate, which by default holds a 1/4"-20 screw and a guiding pin. A 3/8"-16 screw is included and can be stowed underneath the camera plate when not in use.

  • Dual-base head with a 75mm ball base and flat base
  • Tilt lock
  • Includes quick release camera plate and dual-side rosette mount pan handle
  • Rosette adapters on both sides
  • Fixed counterbalance and drag
  • Illuminated bubble level
RM954.00
Stock available
more info
Libec ALX S12 Slider (47")

Libec ALX S12 Overview

The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.

At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.

Key Features
  • 43.5" slide range with a 33 lb payload
  • 33 lb load capacity when used on a tabletop or flat surface
  • Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
  • Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
  • Tension/friction knob, brake knob, and bubble level
  • 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
  • Collapsible tabletop legs for easy setup and storage
  • Height-adjustable feet
  • Includes padded carrying case with fixing handle and maintenance kit
RM2,100.00
Stock available
more info
Libec ALX S4 Slider (15.5")

Libec ALX S4 Overview

The Libec ALX S4 is a 15.5" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.

At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 15.5" rail for separately available 32.6" or 47" rail lengths.

Key Features
  • 12" slide range with a 33 lb payload
  • 33 lb load capacity when used on a tabletop or flat surface
  • Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
  • Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
  • Tension/friction knob, brake knob, and bubble level
  • 15.5" rail can be swapped for optional 32.6" or 47" rail lengths
  • Collapsible tabletop legs for easy setup and storage
  • Height-adjustable feet
  • Includes padded carrying case with fixing handle and maintenance kit
RM1,721.00
Stock available
more info
Libec ALX S8 Slider (32.6")

Libec ALX S8 Overview

The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb. For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.

At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain. For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.

Key Features
  • 28" slide range with a 33 lb payload
  • 33 lb load capacity when used on a tabletop or flat surface
  • Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
  • Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
  • Tension/friction knob, brake knob, and bubble level
  • 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
  • Collapsible tabletop legs for easy setup and storage
  • Height-adjustable feet
  • Includes padded carrying case with fixing handle and maintenance kit
RM1,907.00
Stock available
more info
Libec ALX SP Slider Platform

Libec ALX SP Overview

The ALX SP Slider Platform from Libec is a modular component designed for use with ALX S4, ALX S8, and ALX S12 sliders. Featuring eight roller bearings, the platform smoothly slides along the rail and, due to the position of the bearings, effectively hug the rail to prevent wobble as you operate. A spring-loaded friction knob is used to dial in the desired resistance for each slide, with a brake knob used to lock the platform in place on the rail. The pushing force of the ball bearings against the rail is adjustable using an included Allen wrench. The platform can be easily attached and detached from the slider rail using a leg lock knob. For mounting a camera or flat-base tripod head, the platform has a 3/8"-16 threaded screw.

Features
  • Eight roller bearings on the top and sides allow for smooth, wobble-free motion
  • Tension / friction knob, brake knob, and bubble level
  • Slider platform is modular and can be used with sliders ALX S4, ALX S8, and ALX S12
  • Slider platform can be easily detached and replaced using the leg lock knob
  • Hard protector case included
RM767.00
Stock available
more info
Libec ALX SR12 Slider Rail (47")

Libec ALX SR12 Overview

Add versatility to your ALX slider with the ALX SR12 Slider Rail from Libec. Measuring 47" in length, the rail can be used with your ALX S4 or ALX S8 slider in place of the included rail, allowing you to conveniently switch between shorter or longer rail lengths to adapt to the shooting environment. The 47" rail provides a sliding range of 43.5", and supports loads weighing up to 33 lb. To switch between rail length, simply detach the sliding platform and other components using the leg lock knobs, and then attach them to the new length of rail.

Features
  • 47" slider rail for ALX S4 and ALX S8 sliders
  • 43.5" sliding range
  • 33 lb load capacity when used as a slider in conjunction with ALX SP, BL-75R, fixing handle, and slider feet
  • Detachable design allows for multi-style configurations in any shooting environment
  • Slider rail can be easily attached/detached using the leg lock knobs
  • 1/4"-20 and 3/8"-16 tripod mounting threads in center and at each end
RM686.00
Stock available
more info
Libec ALX SR4 Slider Rail (15.5")

Libec ALX SR4 Overview

Add versatility to your ALX slider with the ALX SR4 Slider Rail from Libec. Measuring 15.5" in length, the rail can be used with your ALX S8 or ALX S12 slider in place of the included rail, allowing you to conveniently switch between shorter or longer rail lengths to adapt to the shooting environment. The 15.5" rail provides a sliding range of 12", and supports loads weighing up to 33 lb. To switch between rail length, simply detach the sliding platform and other components using the leg lock knobs, and then attach them to the new length of rail.

Features
  • 15.5" slider rail for ALX S8 and ALX S12 sliders
  • 12" sliding range
  • 33 lb load capacity when used as a slider in conjunction with ALX SP, BL-75R, fixing handle, and slider feet
  • Detachable design allows for multi-style configurations in any shooting environment
  • Slider rail can be easily attached/detached using the leg lock knobs
  • 1/4"-20 and 3/8"-16 tripod mounting threads in center and at each end
RM380.00
Stock available
more info
Libec ALX SR8 Slider Rail (31.5")

Libec ALX SR8 Overview

Add versatility to your ALX slider with the ALX SR8 Slider Rail from Libec. Measuring 31.5" in length, the rail can be used with your ALX S4 or ALX S12 slider in place of the included rail, allowing you to conveniently switch between shorter or longer rail lengths to adapt to the shooting environment. The 31.5" rail provides a sliding range of 28", and supports loads weighing up to 33 lb. To switch between rail length, simply detach the sliding platform and other components using the leg lock knobs, and then attach them to the new length of rail.

Features
  • 31.5" slider rail for ALX S4 and ALX S12 sliders
  • 28" sliding range
  • 33 lb load capacity when used as a slider in conjunction with ALX SP, BL-75R, fixing handle, and slider feet
  • Detachable design allows for multi-style configurations in any shooting environment
  • Slider rail can be easily attached/detached using the leg lock knobs
  • 1/4"-20 and 3/8"-16 tripod mounting threads in center and at each end
RM537.00
Stock available
more info
Libec AP-1 Adapter Plate

Libec AP-1 Overview

The Libec AP-1 Adapter Plate mounts to a standard tripod adapter and allows for easy attachment of small, handheld cameras to Libec's tripod system.

RM425.00
Stock available
more info
Libec AP-5 All-in-One Camera Platform and Sliding Plate

Libec AP-5 Overview

The Libec AP-5 All-in-One Camera Platform and Sliding Plate is an all-in-one camera platform and sliding plate, with 1/4" and 3/8" screw holes on its base. Using the 1/4" and 3/8" screw holes on its base, you can mount the platform on various camera support equipment. 1/4" and 3/8" spare screws are included and stored in the platform.

  • Camera platform & sliding plate
  • 1/4" and 3/8" holes in base--1/4" and 3/8" screws are included and stored in platform
RM322.00
Stock available
more info
Libec AS-7K Accessory Support Kit

Libec AS-7K Overview

The Libec AS-7K Accessory Support Kit will allow you to attach LCD monitors, microphones, and others accessories to your camera and accessory plate. Using the A7 Accessory Support Adapter included in the kit, AS-7K Accessory Support Kit can also be fixed to other Libec heads.

Suitable positioning of accessories can be achieved by adjusting the fitting angle. With the help of a shoe adapter, the detachable ball head can be attached to the camera. The shoe adapter can also be attached to the body of an accessory support item when not required.

  • Supports equipment for attaching LCD monitors, microphones, and other accessories to a camera and accessory plate
  • Includes an A7 Accessory Support Adapter that can be used to affix the AS-7K Accessory Support Kit to other Libec heads
  • Suitable positioning of accessories can be achieved by adjusting the fitting angle
  • Using the shoe adapter, the detachable ball head can be attached to cameras
  • The shoe adapter can also be attached to the body of an accessory support item when not required
RM605.00
Stock available
more info
Libec BR-2B Mid-Level Spreader

Libec BR-2B Overview

The Libec BR-2B Mid-Level Spreader is designed to offer added stability to RT30B tripods. Best used on uneven surfaces where ground spreaders won't lie flat, the BR-2B also keeps the tripod's legs from twisting.

RM292.00
Stock available
more info
Libec BR-6B Mid-Level Spreader

Libec BR-6B Overview

Quickly set up your tripod as well as add stability with the BR-6B Mid-Level Spreader from Libec. Compatible with the RT40RB, RT50B, RT50C, T102B, and T103B tripods, this telescopic model can extend from 7" to 10.3" to accommodate a wide range of leg angles.

RM292.00
Stock available
more info
Libec Carrying Case

Libec RC-30 Overview

The Libec RC-30 Carrying Case (Black) is a non-padded, vinyl case designed to carry a Libec RT-30 tripod with an RH-30 tripod head attached. It is carried by a handle or an attached, adjustable shoulder strap.

Construction
  • Non-padded vinyl
  • Zipper closure
Carrying options
  • Carry handle
  • Attached, adjustable shoulder strap
  • Compatible with Libec RT-30 tripod with an RH-30 tripod head
RM292.00
Stock available
more info
Libec Clamp Handle for Swift Jib50 Weight Bar

Libec HANDLE50 Overview

This Clamp Handle for Swift Jib50 Weight Bar from Libec is an accessory for the Swift Jib50 which assures smooth operation from the rear of the Swift Jib50. The clamp handle is clamped to the Swift Jib50's weight bar and a remote control (not included) can be attached to the handle.

  • For use with Swift Jib50 weight bar
RM339.00
Stock available
more info
Libec CR-90 Curved Track Rail with Case

Libec CR-90 Overview

The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily. This set completes a 90 degree turn, and interfaces perfectly with the Libec track system.

RM4,376.00
Stock available
more info
Libec CU30 Remote Control Unit for REMO30 Remote Head

Libec CU30 Overview

This CU30 Remote Control Unit for REMO30 Remote Head from Libec allows crane or jib operation duties to be split, allowing more attention to each function. While one operator concentrates on handling the crane or jib arm, another operator can focus on the remote head while using the control box. The remote head operator can wear the Libec vest and attach the T-bar to it. With the REMO30 control box (available separately) on the right, the ZFC-5HD zoom and focus control (available separately) on the left, and a monitor with a ball head attached in front, the remote head operator can move around freely--especially useful with a small crew.

The unit includes a Libec vest, a T-bar (main bar + support pipe) with a monitor mount screw, a Handle50 for zoom focus control access, a tripod adaptor, and a carrying case. The control unit can also be mounted on a tripod using the supplied tripod adapter, for remote operations via a REMO30 Control Box and Cable500 Control Cable (available separately). Control cables can be connected to extend up to 99' for remote operations with no signal interruptions.

  • Included one-size-fits-all vest allows freedom of movement
  • Mounts on standard 75mm/100mm jib arms and tripods
  • Control cables can be connected to extend up to 99' (30 m) in length for remote operation with no signal interruptions
RM1,947.00
Stock available
more info
Libec DL-8B Heavy Duty Dolly for T102B and T102B Tripods (Black)

Libec DL-8B Overview

The DL-8B Heavy Duty Dolly from Libec is designed for use with the T102B and T102B Tripods. It is equipped with casters and  brake locking system.

RM2,915.00
Stock available
more info