Home > Products > Camera stabilizer series
Sort byShowper page
    DJI Ronin-2 3-Axis Handheld/Aerial Stabilizer
    Key Features
    • For DSLRs and Cinema Cameras
    • 30-Pound Payload Capacity
    • Enhanced SmoothTrack Algorithm and GPS
    • Upright, Underslung, and Briefcase Modes
    The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. 
    RM31,900.00
    Pre order
    more info
    DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
    Key Features
    • Supports Cameras up to 8 Pounds
    • Precision of Control: ±0.02°
    • Transmitter for Remote Pan/Tilt Control
    • Toolless Balance Adjustment System
    The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side 
    RM5,100.00
    Backorder in
    more info
    DJI Ronin-MX 3-Axis Gimbal Stabilizer
    Key Features
    • Supports Cameras up to 10 Pounds
    • Compatible with Matrice 600
    • Robust Magnesium Construction
    • Radio Controller for Second Operator
    The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds.
    RM6,710.00
    Backorder in
    more info
    DJI Ronin-S
    Key Features
    • Three-Axis Motorized Gimbal Stabilizer
    • Holds DSLR or Mirrorless Cameras
    • Eight-Pound Payload Capacity
    • Trigger and Mode Buttons for Control
    The DJI Ronin-S is more than just a miniaturized version of the larger Ronin gimbal stabilizers; it represents a scalable ecosystem for integrating DSLR and mirrorless cameras into professional-grade workflows. The single-handed form factor of the Ronin-S lends itself to lighter camera payloads, up to eight pounds. But don't let its size fool you; the Ronin-S 
    RM2,580.00
    Pre order
    more info
    Precision Camera Stabilizer SK-W01N

    Features:

    Lightweight and compact
    Comfortable and flexible handle grip
    Quick-release mounting plate
    Rigid Aluminum and carbon fiber construction
    Side-to-side trim screw
    Fore-and-aft trim screw
    Horizontal and vertical trim screw
    Addable counterweight
    Supports up to 2.2KG
     
    The Sevenoak Precision Camera Stabilizer SK-W01N offers light, agile, seamless shooting for today's videographer. Designed in light and compact feature, the Sevenoak camera stabilizer SK-W01N allows you to keep up with the action more easily than ever, and "fly" almost anywhere the scene takes you--up and down steps, indoors and outside, through crowds etc with precise and elegant control. Its quick-release mount lets you instantly swap camera connections between your stabilizer and any tripod. The unique precision adjustment screws and addable counterbalancing weight can be precisely adjusted to balance your camera.
    RM889.00
    Stock available
    more info
    Sevenoak Mid-Cam Stabilizer

    The Sevenoak SK-SW02N Version 1 Medium Handheld Stabilizer Pro for DSLR Cameras is a lightweight stabilizer, hand-held camera stabilizer system designed for DSLR cameras weighing up to 3KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs. The camera platform moves back and forth and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera's vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.

    PRODUCT OVERVIEW

    • Fine adjustment Camera Balance Platform

    • Integrated quick-release Camera Plate

    • Adjustable convergence, precision, three axis gimbal

    • Adjustable dynamic balance and inertial control Base Platform

    • Made For DSLR, Made For Small Camcorder

    • Handheld Support Rig

    RM889.00
    Stock available
    more info
    Sevenoak Mini Action Stabilizer

    Overview

    Sevenoak Mini Action Stabilizer SK-W08 is a compact, ultra-light camera stabilizer that uses counterweights and gimbal to help you keep your camera steady when shooting video---eliminating distracting camera movement for smoother, more professional-looking movies. It features that a super-smooth gimbal and adjustable counterweight help keep the camera balance and stable, and a built-in bubble Spirit level to check the camera's balance. A comfortable padded hand grip minimizes fatigue when shooting with SK-W08.
    The Sevenoak SK-W08 Handheld Stabilization allows shake-free handheld shots, easily and with minimal fatigue. Designed specifically for lightweight mirrorless cameras or compact camcorders up to 1.5 lbs. Mount camera and be ready to shoot in just minutes.The Sevenoak SK-W08 Handheld Video Stabilization lets you achieve professional results for still shots, panning, moving in and out on subjects and more. Take the step up from hobbyist to professional without the expense. Perfect for outdoor action, long shoots, artistic applications and more.
    The ball joint gimbal design is optimized for smooth function and ease of use; it effectively isolates the rig from user movement, allowing jiggle- and jitter-free shooting. Counterweights are adjustable for precise handling and customized performance. Use the Sevenoak SK-W08 Handheld Video Stabilization System effectively with one hand without tiring, or use two hands for kinetic situations and max control.

    Features
    1) Stabilizes camera to minimize camera shake and reduce fatigue
    2) Super-smooth gimbal
    3) Adjustable counterbalance weights
    4) Built-in Bubble Spirit level
    5) Compatible with Gopro and other action cameras
    6) Compatible with smartphones by adding other mounting devices
    7) Maximum weight capacity: 0.5 KG

    RM177.00
    Stock available
    more info
    Sevenoak Mini Ball Head

    Sevenoak Small Ball Head SK-H1 is a small ball head which enables users to mount various kinds of useful cameras or accessories with 1/4"-20 screw.The 360°rotatable and tiltable Ball-and-socket joint maximize pan-and-tilt flexibility to take the best shoots.

    Product Highlights :

    • Weights: 71g
    • Supports loads: up to 5kg
    • Dimensions: 29*48*54mm(L*W*H)
    • Lightweight,supports loads up to 5kg
    • Solid Aluminum construction
    • Up to 90° Portrait Angle Tilt
    • 360° Rotation with locking knob
    • 1/4″-20 Mount on the top
    • Compatible with tripods or support systems that features a 1/4″-20, 3/8″-16 mount,or cold shoe.

    RM128.00
    Stock available
    more info
    Sevenoak Mini Handheld Carbon Fiber Stabilizer

    Sevenoak SK-SW PRO 1 Overview

    The Sevenoak Mini Handheld Carbon Fiber Stabilizer is a carbon fiber mini stabilizer for loads up to 5.5 lb. It works by mechanical balancing and does not use batteries. Measuring just over 11.5" in height, it provides a portable solution for capturing stable moving shots. The stabilizer works by balancing your camera in relation to the removable sets of counterweights. Each set of counterweights is adjustable in steps between 1.3 to 8.2 ounces. The counterweights attach in a 3-leg arrangement, allowing the stabilizer to stand on its own on a flat surface when balanced.

    The camera platform accepts an included sliding baseplate that allows for balance adjustment in one axis. The platform itself allows you to adjust the camera's position perpendicular to the sliding baseplate for balance in a second axis. The length of the pole can be adjusted by approximately four inches, enabling you to adjust the distance between your camera and the counterweights for balance in a third axis. A, attached soft handgrip enables you to handle and control the stabilizer while shooting.

    Key Features
    • Carbon fiber 3-axis mini stabilizer
    • Supports loads up to 5.5 pounds
    • Collapsed size of 11.5"
    • Three sets of counterweights
    • 3-leg structure allows for use as a tripod
    • Soft handle
    • Universal camera plate included
    RM988.00
    Stock available
    more info
    Sevenoak Mini-Cam Stabilizer

    The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.

      The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera's vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.
     

    Features:

    • Fine adjustment Camera Balance Platform
    • Integrated quick-release Camera Plate
    • Adjustable convergence, precision, three axis gimbal
    • Adjustable dynamic balance and inertial control Base Platform
    RM791.00
    Stock available
    more info
    Sevenoak Pro 2 Camera Stabilizer

    Sevenoak SK-SW PRO 2 Overview

    The Sevenoak Pro 2 Camera Stabilizer lets you capture smooth, free-floating handheld shots with camcorders and camera rigs weighing up to 6.6 pounds. The system employs a height-adjustable gimbal with a two-stage center column which collapses to a travel-ready size for convenient transport. The center column also makes it easy to balance heavier loads without increasing the weight of the stabilizer, letting you shoot for longer periods of time with less arm fatigue. Four counterweights are included, which fit onto two posts at the base of the stabilizer.

    A sliding baseplate easily slides into the camera platform and allows for front-to-back balance adjustment. The platform itself also provides side-to-side adjustments for quick balancing. Once balanced the stabilizer isolates the camera from your body movements, letting you walk or even climb stairs while capturing smooth, elegant-looking footage.

    Load Capacity

    Rated to support a payload of up to 6.6 pounds, this stabilizer is well suited for DSLRs, mirrorless, and small camcorders.
    Adjustable Gimbal
    The height-adjustable gimbal can be positioned along the center column. This helps you balance heavier loads by moving the gimbal higher up on the column, reducing the amount of counterweight you need. Fewer counterweights means less stress on your arm, which results in longer shooting times before fatigue sets in.
    Can be used for high- and low-angle shooting
    Three-Stage Center Column
    Before adding more counterweights to the stabilizer, you can extend the center column to help balance your camcorder. The stabilizer has a maximum extended height of 28.5" and a minimum height of 17.72".
    Textured Rubber Grip
    The stabilizer features a foam rubber grip on the handle for comfort and to aid against slippage. There is also a foam grip on the center column twist-locks for easier tightening and loosening.
    Four Included Counterweights
    The four included counterweights fit onto the two counterweight posts, allowing you to add them one at a time to adjust the unit's center of gravity.
    RM1,235.00
    Stock available
    more info
    Sevenoak SK-GH01 Gimbal-Type Tripod Head for Telephoto Lenses

    The Sevenoak SK-GH01 Swing Gimbal Panorama Head is made of strong aluminum and can bear the weight of up to 10 kgs. The 2-way panoramic head is essential if you wish move your spotting scope or camera and camera lens, freely. The panoramic head is suitable for cameras, spotting scopes, binoculars and telephoto lenses with a maximum length of 60 cm. The panoramic head is easy to adjust and can be set accurately via the integrated measuring scale. Further, the panoramic head is equipped with a quick release mounting plate, which can be shifted forwards and backwards. The mounting plate is equipped with a ¼” male screw thread, on which your camera, spotting scope or binoculars can be mounted and secured. The SK-GH01 can be mounted on all tripods equipped with a 3/8” male screw thread. 

    Included:

    • Sevenoak Gimbal Swing Panorama Head SK-GH01
    • Quick Release Plate SK-QRP01 (15x4.3x1cm)
    • Coloured Packaging
    RM493.00
    Stock available
    more info
    Sevenoak SK-GH02 Carbon Fiber Gimbal-Type Tripod Head

    The Sevenoak SK-GH02 Carbon Swing Gimbal Panorama Head is made of strong carbon and can bear a weight up to 10 kgs. The 2-way panoramic head is essential if you wish to move your spotting scope or camera and camera lens, freely. The panorama head is suitable for cameras, spotting scopes, binoculars and telephoto lenses with a maximum length of 60 cm.

    The Gimbal Swing allows you to create a panorama image by shooting several photos while moving the camera (in all directions), the position of the camera is always the same, this way you’re sure the pictures connect perfectly together.

    The panorama head is easy to adjust and can be set accurately via the integrated measuring scale. Furthermore, the panoramic head is equipped with a quick release mounting plate, which can be shifted forwards and backwards. The mounting plate is equipped with a ¼” male thread, on which your camera, spotting scope or binocular can be mounted and secured. The Carbon SK-GH02 can be mounted on all tripods equipped with a 3/8” male thread. 

    Included:

    • Sevenoak Gimbal Swing Panorama Head SK-GH02
    • Quick Release Plate SK-QRP01 (15x4.3x1cm)
    RM988.00
    Stock available
    more info
    Sevenoak SK-GH04 Carbon Fiber Gimbal Head Adpater

    Sevenoak Fiber Gimbal Head Adpater SK-GH04 is a carbon fiber gimbal head adapter designed for large telephoto lenses and DSLR cameras. It is ideal for photography involving long, heavy telephoto lenses in sports or nature photography, for instance. Working with a long lens on a standard hall head or tilt head can be a real struggle, distracting you from the photography. The gimbal head adapter makes the camera and lens seem almost weightless, with vertical and horizontal tracking of moving objects becoming relatively simple feat not possible with any other support system. An Arca-Swiss-compatible quick release plate is included. And it fits with Arca-Swiss-compatible QR clamp on a heavy-duty ball head.

    Features:

    • “Weightless” freedom of camera movement
    • Quick and easy tracking of moving objects
    • Ideal for long telephoto lenses
    • Fluid panning and tilting
    • Supports any weight tripod supports
    • Arca-Swiss style ball head required
    RM692.00
    Stock available
    more info
    Sevenoak SK-PSC4 Dual Smart Grip

    Sevenoak SK-PSC4 is a Professional Smartphone Rig, Tripod Mount, Filmmaker Grip, and Traveler Stand with adjustable grip to fit most Smartphones. It’s an extremely durable, portable and easy to use tool for serious Smartphone Photographers.

    Product Highlights :

    • Professional Smartphone Rig, Tripod Mount, Filmmaker Grip, and Traveler Stand
    • Adjustable grip to fit most Smartphones.
    • Extremely durable, portable and easy to use tool for serious Smartphone Photographers.
    • The smartphone size which the holder can hold is 5.7-9.7cm
    • Made for avid smartphone photographers, filmmakers,journalists,sporters and travelers
    • Can be used as a Tripod Mount, Filmmaker Grip,and Traveler Stand
    • An ultimate tool for serious smartphone photography
    • Holds your device tightly
    • Compatible with virtual any smartphone model
    • Can be mounted to other devices with 1/4" screw thread
    • Solid and updated Aluminum hand grips
    RM296.00
    Stock available
    more info
    Sevenoak SK-RX0C Cage for Sony RX0

    Sevenoak SK-RX0C is a form-fit camera cage for Sony-RX0 camera. It is made of durable aluminum. You also can amount other accessories through the cold shoe and 1/4” screw threads, like microphone or LED light on it. It’s an extremely durable, portable and easy to use tool.

    Product Highlights :

    • Form-fit for Sony-RX0 camera
    • Made of durable Aluminum
    • Can mount other accessories with built-in cold shoe
    • Can be mounted on different device with 1/4” screw thread
    • Holds your device tightly
    RM247.00
    Stock available
    more info
    Sevenoak SK-W02N Camera Stabilizer

    Sevenoak SK-W02N Overview

    The Sevenoak SK-W02N Camera Stabilizer is a handheld camera support device designed to help you capture smooth, shake-free video. Once balanced, a camera operator can use the SK-W02N to create fluid, "floating" camera movements, even when walking or running. The SK-W02N has a maximum capacity of approximately three pounds and features a standard 1/4"-20 threaded camera screw.

    The SK-W02N employs a ball joint gimbal which isolates the camera from incidental twisting and wobbling motions. Proper balance can be obtained using the included four-piece counterbalance weight set which attaches via a sliding bracket. In addition, a bubble level helps users fine-tune their adjustments. The foam-padded handle supports one-handed operation.

    • Ball joint gimbal design for free-floating camera movements
    • Four-piece counterweight set and bubble level for fine-tuning balance
    • Foam padded handle for one- or two-handed operation
    • Aluminum alloy and steel construction
    • Rubberized non-slip mounting surface
    RM296.00
    Stock available
    more info