Home > Products > Gimbal for Camera
Sort byShowper page
    Benro RedDog R1 Mirrorless Handheld Gimbal Stabilizer

    Benro REDDOG R1 Overview

    The RedDog R1 Mirrorless Handheld Gimbal Stabilizer from Benro is a single-hand control stabilizer designed to be used with Canon EOS series, Panasonic GH4/GH5 series, Nikon D series, or Sony mirrorless and RX black card series cameras. It features built-in wireless Bluetooth support for iOS and Android systems. The RedDog has an independent quick release plate design and a 60-second easy balance design. This stabilizer runs on two included 3200mAh lithium batteries which provide a 12-hour runtime. A charger, lens bottom bracket, USB Type-C cable, USB Type-C to lightning cable, USB Type-A cable, carrying bag, and shoulder belt are included.

    • Low-angle photography with unique rotation system allows for ultra-low shooting position, providing a different view
    • Foldable and portable, it can be restored in a backpack with no need to remove any parts
    • Motion time-lapse with direct graph and three axes association
    • By using camera cable this stabilizer can make timely adjustment of focus with one hand
    • Full follow, full lock, horizontal follow, and roll follow modes
    • App specs can be controlled by smart mobile phone
    • Firmware upgrade by one button
    • Folded grip design
    • Convertible design allows you to switch between normal and low-angle mode
    • The storage bag of the stabilizer supports quick storage
    • Processed with CNC machining and an anodized surface
    • Circuit plus control algorithm can achieve 6 ms high speed response
    • Posture solution algorithm separates every control axis
    • Joystick adjusts camera focus, photos, videos, and zoom in/out with single-hand operation
    • Independent quick release plate allows device movement in 10 seconds
    • Part 15 FCC compliance
    RM1,699.00
    Stock available
    more info
    Feiyu AK2000 3-Axis Gimbal Stabilizer

    Feiyu AK2000 Overview

    The Feiyu AK2000 3-Axis Gimbal Stabilizeroffers a payload of 6 lb and is designed with several advanced and distinctive features. It has a handwheel on the side that allows you to control the movement of the camera in select operation modes of the gimbal, such as pan and tilt modes. The handwheel also lets you digitally control focus and zoom with compatible cameras (see below). Additionally, the handwheel controls the optional motorized follow focus accessory supported by the gimbal. The AK2000 provides 360° pan, tilt, and roll motion.

    Another outstanding feature is a touchscreen LCD smart panel integrated on the handle. The display, the joystick, and the handwheel work together to let you assign and adjust all the settings of the gimbal. The AK2000 also has an angled motor arm so there's nothing blocking your camera's screen for framing and monitoring. The gimbal also includes the companion Feiyu ON iOS/Android app (free download) that lets you adjust settings and perform various actions remotely.

    An optional Feiyu extension rod can be attached to the bottom of the gimbal handle so you can comfortably hold the gimbal with both hands for select types of shots.

    Cameras Supported for Digital Focus Control
    The following cameras can be paired with the gimbal over Wi-Fi for direct digital focus control from the gimbal when using select lenses.
    Canon
    • 80D
    • 6D Mark II
    • 6D
    • 200D
    • 5D Mark IV
    Panasonic
    • GH4
    • DMC-LX100
    • DMC-LX10
    • DC-ZS70GK
    • DC-ZS220GK
    • DC-GF9XGK
    • DC-GF9KGK
    • DC-GH5SGK-K
    • DC-GX9KGK-K
    • DC-GF10KGK
    Cameras Supported for Digital Zoom Control
    The following cameras can be paired with the gimbal over Wi-Fi for direct digital zoom in/out control from the gimbal when using select lenses.
    Sony
    • a7 III
    • a7S II
    • a7R
    • RX100 V
    • RX100 IV
    • RX100 VI
    • a5100
    • a6000
    • a6500
    • a6300
    • QX1
    Panasonic
    • DMC-LX100
    • DMC-LX10
    • DC-ZS70GK
    • DC-ZS220GK
    • DC-GF9XGK
    Multifunction Handwheel
    High-precision magnetic induction knob allows control of focus, zoom, and camera movement in select operation modes of the gimbal, including pan and tilt modes.
    Touchscreen LCD Smart Panel
    Low-power LCD touch panel, in combination with the joystick and handwheel, allows for easy adjustment of all the gimbal's settings. It slides left/right to display different setting options.
    Angled Motor Arm
    A beveled angle design prevents obstruction of the camera screen during shooting, allowing for better framing and monitoring.
    Manfrotto PL501 Compatible
    The AK2000 is designed with a fixed mounting plate and comes with a quick release plate. The fixed mounting plate also supports the Manfrotto PL501 quick release plate for more flexible compatibility with tripods and other camera supports.
    High-Precision Algorithms
    The AK2000 features an M4 kernel MCU, 0.02° high-precision magnetic encoding sensor, and w5 generation control algorithm with correction speed of 2000x per second, all adding up to allow high-precision operation.
    Wi-Fi + Bluetooth Dual Module Connection
    The gimbal can be connected over Wi-Fi to compatible devices to control photo/video capture, focus, zoom, sensitivity adjustment, white balance, and exposure value, as well as to switch modes. At the same time, the included Feiyu ON iOS/Android app can connect to your camera via Bluetooth to set up various other parameters.
    12-Hour Battery Life
    Four included 18650 lithium-polymer batteries (2200mAh each) install into the handle to provide up to 12 hours of battery life.
    USB Expansion Interface
    A multifunction USB expansion interface lets you charge the camera and accessories.
    Pan Mode
    The roll and tilt direction are fixed and the camera moves left/right, according to the movements of the user's hand.
    Follow Mode
    The roll direction is fixed and the camera moves left/right, up/down, according to the movements of the user's hand.
    Lock Mode
    The orientation of the camera is fixed.
    All Follow Mode
    All three axes of the gimbal follow the user's hand movements.
    Autorotation Mode
    One of the selectable modes of operation is an autorotation mode that allows you to assign a pre-set travel route for standard video capture as well as time-lapse photography.
    1/4"-20 Mounting Holes
    A 1/4"-20 threaded mounting hole on the bottom of the handle allows extending the length of the gimbal with an optional extension rod, as well as mounting it on various other supports. The gimbal also offers 1/4"-20 threaded holes in the following locations for attaching accessories: on the top of the sliding arm of the tilt axis, at the front of the fixed plate, and on the pan motor.
    RM1,799.00
    Stock available
    more info
    Zhiyun-Tech Crane-2 3-Axis Stabilizer with Follow Focus for Select Canon DSLRs

    Zhiyun-Tech CRANE-2 Overview

    Gain greater control over your gimbal shots with the Zhiyun-Tech Crane-2, a 3-axis handheld stabilizer with an integrated follow focus control for select Canon cameras. The Crane-2 supports DSLRs, mirrorless cameras, and camcorders weighing up to a solid seven pounds. Connect your Canon DSLR or mirrorless camera (released after 2008, with an original autofocus lens) to the gimbal via cable, then adjust focus using the large thumbwheel on the handgrip. The Crane-2 offers three levels of focus control, enabling you to fine-tune your focusing based on the lens used, and the shot itself.

    For quick, convenient adjusting of your camera's settings, the Crane-2 provides an interface comparable to those found on most cameras. Two large buttons, and two smaller ones, on the handgrip are pressed or rotated to scroll through and choose parameters. An LED screen above the controls enables you to quickly and easily monitor your settings. The Crane-2 offers improved motor torque, response speed, and image stabilization over earlier Zhiyun models, enabling smooth, reliable moves.

    Shoot up to a whopping maximum of 18 hours—the Crane-2's three 18650-type batteries provide 6000mAh of capacity. Select Sony cameras may be charged through the gimbal, eliminating time otherwise spent swapping out camera batteries. Additional Crane-2 features include a Manfrotto-standard quick release plate for rapid camera mounting, and a "slow-fall" function that protects your camera from a sudden drop when the stabilizer is powered down.

    Features
    • Supports cameras weighing up to 7 pounds
    • Improved torque, response, and image stabilization over prior models
    • Quick, direct camera control via handgrip buttons
    • LED screen displays camera and stabilizer settings
    • Manfrotto-standard quick release plate for quick camera mounting
    • Maximum of 18-hour runtime with included batteries
    • "Slow-fall" feature protects your camera from a sudden drop when the Crane-2 is powered down
    Follow Focus Function Compatibility
    Three-level follow focus control for Canon DSLR and mirrorless cameras released after 2008, with original Canon autofocus lenses
    RM3,309.00   2,448.66   26%
    Stock available
    more info
    Zhiyun-Tech Gimbal Crane 3 LAB Single Handle

    Product Highlights

    • 10 lb Payload
    • Innovative Top Handle Gimbal Design
    • Can Be Used Two-Handed
    • Easy Switching to Underslung Mode
    • Dual Servo Support, Zoom/Focus Handwheel
    • Multifeatured iOS/Android ZY PLAY App
    • 1080p Wireless Transmission to Phone/App
    • Axis Latch Lock Easy Balancing System
    • Supports Optional Phone Holder
    • Onboard Controls & OLED Status Screen
    RM3,899.00   2,800.00   28%
    Out of stock
    more info
    DJI Ronin-SC Gimbal Stabilizer
    • Three-Axis Motorized Gimbal Stabilizer
    • Designed for Mirrorless Cameras
    • One-Handed Operation, 4.4 lb Max. Load
    • Force Mobile Smartphone Control
    RM1,499.00
    Stock available
    more info
    Moza Air 2 3-Axis Handheld Gimbal Stabilizer
    • 9.25 lb Weight Capacity / 8 Follow Modes
    • Supports for iFOCUS Lens Control System
    • Unobstructed View of Camera LCD
    • 12 Buttons for Gimbal, Camera, Settings
    RM2,448.00   1,740.00   29%
    Stock available
    more info
    Moza AirCross 2 3-Axis Handheld Gimbal Stabilizer
    • For Mirrorless/DSLR Cameras up to 7 lb
    • Angled Motor Arm for Clear View of LCD
    • Portrait / Landscape Mode Switchable
    • Up to 12-Hour Runtime
    RM1,910.00   1,480.00   23%
    Stock available
    more info
    Zhiyun-Tech Crane-M 3-Axis Handheld Gimbal Stabilizer
    • For Mirrorless, Action Cams, and Phones
    • Supports Devices up to 1.4 lb
    • 360° Rotation Along All Three Axes
    • Large 4-Way Joystick
    • Lock, Yaw, Pitch/Yaw, and Inverted Modes
    • 32-Bit Triple-MCUs at 4 kHz Frequency
    • High Accuracy Brushless Motors
    • Toolless Adjustment of All Axes
    • Remote iOS/Android Control via Bluetooth
    • 12-Hour Runtime On Included Batteries
    RM1,099.00
    Stock available
    more info
    Moza AirCross 2 3-Axis Handheld Gimbal Stabilizer with iForcusM
    • For Mirrorless/DSLR Cameras up to 7 lb
    • Angled Motor Arm for Clear View of LCD
    • Portrait / Landscape Mode Switchable
    • Up to 12-Hour Runtime
    • With iForcusM
    • Lightweight, Quiet 15mm Rod Mount Motor
    • Two Units Can Be Mounted on AirCross 2
    • Powered via CAN Bus Connection to Gimbal
    RM2,290.00   1,780.00   22%
    Pre order
    more info
    Zhiyun-Tech CRANE-M2 3-Axis Handheld Gimbal Stabilizer
    • Compact, more lightweight design for compact cameras, smartphones, and action cams up to 1.6 lb (an action cam mount is sold separately)
    • 360° pan, 310° tilt, and 324° roll rotation
    • 7-hour runtime on a built-in battery
    • Built-in Wi-Fi and Bluetooth
    • ZY Play iOS/Android app
    • Special app features such as time-lapse, panorama, and slow-motion capture
    • OLED display
    • One-button quick release camera mounting system
    • Scale marks and memory locks for balancing
    • Hand strap, mini tripod, and other accessories included
    RM999.00
    Stock available
    more info
    Feiyu AK4000 3-Axis Gimbal Stabilizer

    Feiyu AK4000 Overview

    The Feiyu AK4000 3-Axis Gimbal Stabilizeroffers a payload of 8.8 lb and is designed with several advanced and distinctive features. It has a handwheel on the side that allows you to control the movement of the camera in select operation modes of the gimbal, such as pan and tilt modes. The handwheel also lets you digitally control focus and zoom with compatible cameras (see below). Additionally, the handwheel controls the optional motorized follow focus accessory supported by the gimbal. The AK4000 provides 360° pan, 230° tilt, and 360° roll motion.

    Another outstanding feature is a touchscreen LCD smart panel integrated on the handle. The display, the joystick, and the handwheel work together to let you assign and adjust all the settings of the gimbal. The AK4000 also has an angled motor arm so there's nothing blocking your camera's screen for framing and monitoring. The gimbal also includes the companion Feiyu ON iOS/Android app (free download) that lets you adjust settings and perform various actions remotely.

    An extension rod supplied with the AK4000 can be attached to the bottom of the gimbal handle so you can comfortably hold the gimbal with both hands for select types of shots.

    Cameras Supported for Digital Focus Control
    The following cameras can be paired with the gimbal over Wi-Fi for direct digital focus control from the gimbal when using select lenses.
    Canon
    • 80D
    • 6D Mark II
    • 6D
    • 200D
    • 5D Mark IV
    Panasonic
    • GH4
    • DMC-LX100
    • DMC-LX10
    • DC-ZS70GK
    • DC-ZS220GK
    • DC-GF9XGK
    • DC-GF9KGK
    • DC-GH5SGK-K
    • DC-GX9KGK-K
    • DC-GF10KGK
    Cameras Supported for Digital Zoom Control
    The following cameras can be paired with the gimbal over Wi-Fi for direct digital zoom in/out control from the gimbal when using select lenses.
    Sony
    • a7 III
    • a7S II
    • a7R
    • RX100 V
    • RX100 IV
    • RX100 VI
    • a5100
    • a6000
    • a6500
    • a6300
    • QX1
    Panasonic
    • DMC-LX100
    • DMC-LX10
    • DC-ZS70GK
    • DC-ZS220GK
    • DC-GF9XGK
    Multifunction Handwheel
    High-precision magnetic induction knob allows control of focus, zoom, and camera movement in select operation modes of the gimbal, including pan and tilt modes.
    Touchscreen LCD Smart Panel
    Low-power LCD touch panel, in combination with the joystick and handwheel, allows for easy adjustment of all the gimbal's settings. It slides left/right to display different setting options.
    Angled Motor Arm
    A beveled angle design prevents obstruction of the camera screen during shooting, allowing for better framing and monitoring.
    Manfrotto PL501 Compatible
    The AK4000 is designed with a fixed mounting plate and comes with a quick release plate. The fixed mounting plate also supports the Manfrotto PL501 quick release plate for more flexible compatibility with tripods and other camera supports.
    High-Precision Algorithms
    The AK4000 features an M4 kernel MCU, 0.02° high-precision magnetic encoding sensor, and w5 generation control algorithm with correction speed of 2000x per second, all adding up to allow high-precision operation.
    Wi-Fi + Bluetooth Dual Module Connection
    The gimbal can be connected over Wi-Fi to compatible devices to control photo/video capture, focus, zoom, sensitivity adjustment, white balance, and exposure value, as well as to switch modes. At the same time, the included Feiyu ON iOS/Android app can connect to your camera via Bluetooth to set up various other parameters.
    12-Hour Battery Life
    Four included 18650 lithium-polymer batteries (2200mAh each) install into the handle to provide up to 12 hours of battery life.
    USB Expansion Interface
    A multifunction USB expansion interface lets you charge the camera and accessories.
    Pan Mode
    The roll and tilt direction are fixed and the camera moves left/right, according to the movements of the user's hand.
    Follow Mode
    The roll direction is fixed and the camera moves left/right, up/down, according to the movements of the user's hand.
    Lock Mode
    The orientation of the camera is fixed.
    All Follow Mode
    All three axes of the gimbal follow the user's hand movements.
    Autorotation Mode
    One of the selectable modes of operation is an autorotation mode that allows you to assign a pre-set travel route for standard video capture as well as time-lapse photography.
    1/4"-20 Mounting Holes
    A 1/4"-20 threaded mounting hole on the bottom of the handle allows extending the length of the gimbal with an extension rod (included with the AK4000), as well as mounting it on various other supports. The gimbal also offers 1/4"-20 threaded holes in the following locations for attaching accessories: on the top of the sliding arm of the tilt axis, behind the tilt motor, at the front of the fixed plate, and on the pan motor.
    RM2,699.00
    Stock available
    more info
    Zhiyun-Tech WEEBILL LAB Creator Accessories Kit

    Zhiyun-Tech WEEBILL-LAB-CAK Overview

    This Zhiyun-Tech WEEBILL LAB Creator Accessories Kit has everything you need to get started with your Zhiyun WEEBILL LAB gimbal. It consists of a smartphone holder, a servo focus and zoom max kit, a mini monopod, a large multifunctional camera belt, and two quick setup kits.

    The articulating smartphone holder secures phones up to 6.3" wide to the WEEBILL LAB, and it folds up when not in use. The quick setup kit consists of two adapters that allow you to put together and break down your gimbal quickly, rather than screwing the joints together. The compact, padded mini monopod has three telescoping stages and secures with twist locks.

    The large camera belt allows you to conveniently mount various accessories to keep your hands free, and offers additional support for your WEEBILL LAB. Finally, the servo focus and zoom max kit allows you to control your camera's focus or zoom from your smartphone while mounted on the WEEBILL LAB.

    RM1,299.00
    Out of stock
    more info
    Zhiyun-Tech WEEBILL LAB Creator Package

    Zhiyun-Tech WEEBILL LAB Overview

    The Zhiyun-Tech WEEBILL LAB Creator Package includes the WEEBILL LAB gimbal and dedicated accessories that allow for an optimal workflow with the gimbal. The WEEBILL LAB supports up to 6.6 lb and features an innovative design that supports a mini tripod on top and bottom. In this way it provides an additional point of stability and an easy way to switch to underslung mode.

    In addition to the accessories that come standard with the WEEBILL LAB, such as a mini tripod, the Master Package also includes a mini monopod, zoom/focus servo, two quick setup adapters, a phone holder, and a multifunctional camera belt in size large.

    The monopod is designed to secure to a quick release receptacle on the camera belt and allow for more stable jib-style shots, with the weight of the gimbal taken off your hands and supported by the belt. Even without the belt the monopod can be used as a comfortable extension.

    The zoom/focus motor is the Max version motor, which has enough torque to control zoom (whereas the Lite version is only strong enough for focus control). The WEEBILL LAB supports a single motor, and this one can be used interchangeably between the focus and zoom rings.

    The Quick Setup Adapters let you attach the mini tripod and monopod to the gimbal by quick release functionality, instead of having to screw them in each time. And the phone holder will hold your smartphone on the side of the gimbal for monitoring. It supports up to 6.3" phones and can be articulated forward and backward as well as folded up when not in use.

    Please see a full description of each packaged item below.

    • WEEBILL LAB Handheld Stabilizer for Mirrorless Cameras

      The Zhiyun WEEBILL LAB Handheld Stabilizer for Mirrorless Cameras supports cameras weighing up to 6.6 pounds. It features a removable handheld tripod which can be mounted on the battery bin as a grip providing additional functionality, as opposed to crowding all the controls on the primary handgrip. The gimbal has a nominal runtime of ten hours and requires two 18650 batteries. It is built using aviation-grade motors. The WEEBILL LAB allows you to connect and control select cameras via an included cable, and supports wireless transmission of the camera's video via Wi-Fi. Control over the gimbal and camera is by the ViaTouch Control System.

      The gimbal features pan follow, full follow, locking mode, PhoneGo mode, Vortex mode, and POV mode. An included lens support is useful when working with long lenses and an external follow focus motor (not included) for pulling focus on manual lenses. A downloadable app allows you to fine tune and control the gimbal wirelessly. The included removable tripod holds the gimbal upright while balancing and folds to become an extension to the main handle. For compatible list of cameras and lenses see the "Compatible List" below the list of what's in the box.

      The WEEBILL LAB is a configurable gimbal platform that works well when held in either standard or underslung position
      It features both Arca-Swiss and Manfrotto compatible quick release plates
      its crafted latch design simplifies both balancing and setup
      The wireless image transmission system is compatible with mobile devices running iOS or Android
      The ViaTouch Control System enables using your phone screen to make gimbal movements and adjust camera settings, all while framing the shot
      Motion sensor control allows you to control the gimbal by simply moving your mobile device
      Time-lapse options include long exposure, panorama, and tracking time-lapse
      The ZY Play app is available for iOS, with the Android version slated for release before December 1, 2018
      Default Wi-Fi Password
      12345678
      Compatible Cameras for Limited Electronic Control
      Sony: a9, a7 III, a7R III, a7R II, a7SII, a6500, a6300, a6000
      Panasonic: GH5s, GH5

      For updated compatibility see the manufacturer's website.
       UPC: 191493000964
    • TransMount Max Servo Zoom/Focus Controller for Crane 3-Lab & WEEBILL LAB

      The Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller can be used interchangeably for zoom and focus control on the Crane 3-Lab and WEEBILL LAB gimbals. It has a powerful-enough motor to control zoom, whereas the lighter-weight TransMount Lite is designed for focus control only.

      The Crane 3-Lab supports up to two motors at the same time, and it's recommended to use the TransMount Max and TransMount Lite together if requiring both zoom and focus control on the Crane. The WEEBILL, however, supports only one motor, so the TransMount Max is recommended as the only solution because it can be used interchangeably for both functions.

      Featuring a toolless design, the TransMount Max attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.

      Key Features
      • Can be used interchangeably for zoom and focus control
      • Recommended as the zoom solution for the Crane 3-Lab, which supports two motors at the same time, and as the sole solution for the WEEBILL LAB, which supports only one motor
      • Toolless design—assembles with the included support bracket and mounting rod and attaches to the bottom of the gimbal's baseplate using supplied thumbscrews
      • Connects to the gimbal via a USB cable and controls focus with zero latency
    • TransMount Quick Setup Adapter for Crane 3-Lab & WEEBILL LAB

      The TransMount Quick Setup Adapter from Zhiyun-Tech is a quick release adapter for instantly attaching mini tripods and monopods to the Crane 3-Lab or WEEBILL LAB gimbal. It consists of two parts—one screws onto the tripod/monopod and the other to the gimbal's tripod mount, and the two simply click into each other. To detach them, you just need to pull back on a collar. The adapter prevents having to screw and unscrew a tripod/monopod each time. Featuring a 1/4"-20 male/female design, the adapter can also be used independent of the gimbal for various accessories, such as monitors.

      Two units are recommended for the WEEBILL LAB because the WEEBILL offers two locations for attaching a mini tripod—one on top and one on the bottom. With an adapter attached at each of the two locations, your mini tripod can easily be moved between one and the other to switch between standard and underslung modes.

      The Quick Setup Adapter features a robust aluminum construction.

      Key Features
      • Quick release adapter for attaching mini tripods and monopods to the Crane 3-Lab or WEEBILL LAB gimbal
      • Consists of two parts—one secures to the tripod/monopod and the other to the gimbal; the two click into each other
      • Detachable by pulling back on a collar
      • Can also be used separately from the gimbal with various other 1/4"-20 accessories
      • Aluminum construction
       UPC: 191493001046
    • TransMount Phone Holder with Crown Gear for Crane 3-Lab & WEEBILL LAB

      The TransMount Phone Holder with Crown Gear from Zhiyun-Tech is compatible with the Crane 3-Lab and WEEBILL LAB. It secures on the side of the gimbal and is adjustable to hold phones up to 6.3" wide when the phone is held in landscape orientation. It also articulates forward/backward and can be folded up when not in use.

       UPC: 191493001077
    • TransMount Multifunctional Camera Belt (Large)

      Designed to support the TransMount Mini and Telescopic monopods, the large-sized Zhiyun-Tech TransMount Multifunctional Camera Belt provides a point of stability for anything you mount on the monopod, including a gimbal. When the belt is used with a monopod and gimbal such as the WEEBILL LAB, the additional point of balance allows for substantially more stable and comfortable jib-type shots and lets you control the gimbal's focus wheel more easily. The belt also has military-grade strips along its length for hanging accessories such as lens bags and the TransMount Baseplate.

      For securing the monopod, the belt features a receptacle suspended on a hanging strap. The receptacle has a removable quick release 1/4"-20 mounting platform that screws into the bottom of the monopod and then pops in and out of the receptacle by quick release functionality. Two registration pins on the receptacle lock into a groove on the 1/4"-20 mounting platform to lock the two together.

      Key Features
      • Designed to support the Zhiyun-Tech TransMount Mini and Telescopic monopods via a receptacle with a quick release mounting platform (dual registration pins)
      • Provides an additional point of stability for jib-type shots and much more
      • Allows the user to more easily control the focus wheel of gimbals such as the Crane 3-Lab or WEEBILL LAB
      • Military grade strips for hanging lens bags and other accessories
    RM3,309.00
    Stock available
    more info
    Zhiyun-Tech WEEBILL LAB 3 Axis Gimbal for Mirrorless

    Zhiyun-Tech WEEBILL LAB Overview

    The Zhiyun-Tech WEEBILL LAB introduced a new design to motorized handheld gimbal stabilizers. Zhiyun has added support for a mini tripod in the upper section of the gimbal, allowing for two-handed operation as well as easily switching to underslung mode. At the same time, Zhiyun has shortened the main handle to make the gimbal more compact and lighter. The WEEBILL LAB supports up to 6.6 lb and offers pan follow, full follow, locking, POV, vortex, and PhoneGo modes with 360° pan, tilt, and roll rotation. PhoneGo mode enables the gimbal to operate at maximum follow speed for extreme sports and similar applications. The WEEBILL runs for up to 10 hours on two supplied 18650 batteries.

    The WEEBILL LAB supports a single external servo motor for controlling focus or zoom using the onboard handwheel on the side. The TransMount Max Servo is recommended because it has the torque to handle zoom (which requires more power than focus adjustment) and can be used interchangeably between the focus and zoom rings.

    Via a Wi-Fi connection to an iOS/Android phone or tablet, the WEEBILL LAB is capable of wirelessly transmitting your video recordings to your mobile device in real time in 720p resolution. This feature is compatible with select cameras such as the Sony a7S and Panasonic GH5. Please see Zhiyun-Tech's website for a full camera compatibility list.

    The gimbal includes an iOS/Android ZY PLAY app (free download) which provides features such as panorama, focus time-lapse, motion time-lapse, long exposure time-lapse, camera settings, and more. The WEEBILL also has an OLED display and onboard controls including a joystick and shutter release button.

    Along with the WEEBILL, Zhiyun has released an entire ecosystem of optional, dedicated TransMount accessories to allow for more enhanced use of the gimbal. These include a phone holder for monitoring, servo motor, camera belt, and specialized monopods that work together with the belt and gimbal to allow for stable jib-style shots. Another useful accessory is the TransMount Quick Setup Adapter which allows you to attach the included mini tripod by quick release functionality. The mini tripod can also be attached the standard way on the bottom of the gimbal, to function as a stand or extension. If you incorporate two Quick Setup Adapters, you'll be able to quickly move the mini tripod between the two locations. You can also add a second mini tripod and have one in both positions.

    Crafted Latch Design
    The WEEBILL LAB is designed with a red latch next to each axis, making balancing much easier. You can lock certain axes with these axes while balancing the other(s), and you can save the setup for later use. This design allows for flexible use of the gimbal, providing for more efficient use in run-and-gun applications.
    Wireless Image Transmission
    Via a Wi-Fi connection to an iOS/Android phone or tablet, the WEEBILL LAB is capable of wirelessly transmitting your video recording to your phone as a 720p image in real time.
    Dual QR Plates and Enhanced Balancing System
    The WEEBILL LAB camera balancing system features the above-mentioned latch design plus dual quick release plates (Arca-Swiss/Manfrotto). This combination allows balancing the camera and getting the gimbal ready for operation faster and easier. The dual quick release plates consist of a Manfrotto baseplate and Arca-Swiss camera plate. With the camera plate attached to your camera you can transition between equipment and not have to rebalance the gimbal when attaching the camera back on the gimbal.
    PhoneGo Mode
    In addition to the standard operational modes, the WEEBILL LAB also features PhoneGo Mode, which lets the gimbal operate at maximum follow speed for extreme sports and similar applications.
    ZY PLAY
    The included ZY PLAY iOS/Android app offers features such as panorama, focus time-lapse, motion time-lapse, long exposure time-lapse, and more.
    ViaTouch Control System
    The WEEBILL LAB's ViaTouch Control System consists of a variety of controls that come up on the ZY PLAY app and allow for framing shots, controlling certain gimbal movements, and adjusting camera settings.
    Wireless Password
    The default Wi-Fi password for the WEEBILL LAB is "12345678".
    RM2,488.00   1,850.00   26%
    Out of stock
    more info