Browse by themes
Themes > Rode Microphones
Rode Ai-1 USB Audio Interface
Rode Ai-1 USB Audio Interface

Rode Ai1 Overview

The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

  • Desktop USB audio interface with low-noise Class-A discrete preamplifier
  • Sampling rate of up to 96kHz/24-bit
  • One combo XLR-1/4" combo input
  • Two balanced 1/4" monitor outputs
  • One discrete, studio-quality headphone output
  • Phantom power for condenser microphones
  • Zero-latency monitor mode
  • USB bus powered
  • USB Type-C connector for future proof operation
  • Rugged body with Satin Black Finish
  • Class compliant—no drivers required
  • Includes Ableton Live Lite
  • Includes USB cable
RM668.00
Stock available
more info
Rode K2 - Variable Pattern Studio Tube Condenser Microphone
Rode K2 - Variable Pattern Studio Tube Condenser Microphone

Rode K2 Overview

The K2 Variable Pattern Dual 1.0" Condenser Valve Microphone from Rode delivers the sonic quality expected of a Class-A tube microphone. At the heart of the microphone is a hand-selected 6922 twin-triode valve. The valve provides warmth and detail while reproducing a flat, uncolored frequency response. The K2 boasts a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transients. An external power supply provides user access of up to 3 polar patterns. Cardioid, omnidirectional, and figure eight are all available and the patterns are user variable, allowing custom contouring of each pattern as needed.

Class-A Valve Circuitry
At the heart of the microphone is a hand-selected 6922 twin-triode valve. The tube electronics yield the warmth and transparency expected of Class-A analog electronics.
Variable Polar Patterns
The K2 features cardioid, omni-directional, and figure-eight polar patterns. The patterns are user variable, allowing custom contouring of each pattern as needed.
Wide Dynamic Range
The microphone features a dynamic range of 150 dB. This ensures detailed, accurate pick up of low signals and distortion free, transparent pick up of transient signals.
RM3619.00
Stock available
more info
Rode M1 Handheld Cardioid Dynamic Microphone
Rode M1 Handheld Cardioid Dynamic Microphone

Rode M1 Overview

The Rode M1 is a handheld cardioid dynamic microphone designed for reliable reproduction of vocals, speech, guitars, and drums in concert venues, houses of worship, and live stage applications. Its dynamic element utilizes a neodymium magnet for high output without excessive preamp gain and delivers a frequency response of 75 Hz to 18 kHz. The resulting tone is smooth and defined with a mild bump at 200 Hz and a gentle rise from 4 to 10 kHz.

The cardioid polar pattern excels at rejecting sound at its off-axis points, yielding enhanced immunity to feedback. The balanced, low-impedance output and low handling noise maintain signal integrity, and the durable, all-metal construction delivers tour-worthy toughness. The M1's gold-plated XLR 3-pin output ensures high conductivity and compatibility with most microphone preamps. It ships with a microphone clip and a padded zip pouch.

  • All-metal construction designed to handle touring
  • Cardioid polar pattern minimizes off-axis noise and feedback
  • Dynamic capsule maximizes headroom
  • Gold-plated XLR 3-pin connector resists tarnish and maximizes conductivity
  • Designed and manufactured in Australia
RM513.00
Stock available
more info
Rode M1-S Live Performance Dynamic Microphone with Lockable Switch
Rode M1-S Live Performance Dynamic Microphone with Lockable Switch
  • Live dynamic vocal microphone
  • High output neodymium capsule
  • Cardioid polar pattern
  • Lockable on/off switch
  • XLR security lock
  • Ergonomically designed heavy duty all-metal body
  • Low handling noise
  • 10 year extended warranty when you register your microphone

With rock-solid build quality and a high-power neodymium capsule, the RØDE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty, following registration of purchase.

The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.

Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.

The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched.

For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable.

Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.

RM596.00
Stock available
more info
Rode M2 Professional Condenser Handheld Microphone
Rode M2 Professional Condenser Handheld Microphone

Rode M2 Overview

The Rode M2 Handheld Condenser Microphone delivers professional, detailed vocal reproduction in live sound reinforcement, small public address and recording applications. The M2 features a condenser capsule with a supercardioid polar pattern for superior rejection against feedback and off-axis noise. An on/off switch and rugged enclosure are also featured.

  • Live condenser vocal microphone
  • Feedback rejecting supercardioid pick up pattern
  • Locking on/off switch
  • Heavy duty metal body
  • High level of RF rejection
  • Low handling noise
  • Designed and manufactured in Australia
  • Ten year warranty
RM927.00
Stock available
more info
Rode M3 Versatile End-Address Condenser Microphone
Rode M3 Versatile End-Address Condenser Microphone

Rode M3 Overview

The M3 Versatile End-Address Condenser Microphone from Rode is designed to be completely at home in the studio, on stage, or on location. It features a heavy-duty metal body and an internally shockmounted 1.3" condenser capsule. The mic can be powered with 24V or 48V phantom power or an internal 9V battery.

The microphone's -10 dB and -20 dB level attenuator pad is selectable from inside the battery compartment and allows you to record loud sources like a snare drum or guitar amplifier. A selectable high-pass filter is built into the microphone power switch that introduces a filter at 80 Hz and helps reduce low-frequency sounds and handling noise. The Rode M3 includes a windshield, a mic clip, and a zip pouch.

Battery or Phantom-Powered Condenser
The Rode M3 microphone can be powered by 24 to 48V phantom power or an internal 9V alkaline battery.
Cardioid Polar Pattern
The microphone's cardioid polar pattern reduces off-axis noise and maximizes gain.
-10 dB and -20 dB Pad Switch
A three-position pad switch maximizes headroom up to -10 dB and -20 dB.
High-Pass Filter
A high-pass filter switch eliminates noise and hum at the lower frequency range.
RM772.00
Stock available
more info
Rode M5 Matched Pair
Rode M5 Matched Pair

Rode M5 Overview

Each of this matched pair of M5 Compact 1/2" Condenser Microphones from Rode features a cardioid polar pattern, an all-metal body, active electronics, and a 20 Hz to 20 kHz frequency response. This permanently polarized condenser mic can be used in several environments including stage, theater, studio, and home applications. It is well-suited for instruments, choirs, or anywhere you would employ a small-diaphragm condenser microphone.

The matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones. The M5 is finished with Rode's ceramic coating, which offers a sleek matte-black finish. WS5 windshields and RM5 stand mounts are included.

  • This matched pair has been carefully selected to ensure a variation of no more than 1 dB sensitivity between the microphones
  • Ceramic coating with matte-black finish
  • 1/2" capsule with gold-plated membrane
  • Cardioid polar pattern
  • All-metal body
  • Ultra-low noise
RM1031.00
Stock available
more info
Rode NT-1 KIT 1" Cardioid Condenser Microphone with SMR Shockmount
Rode NT-1 KIT 1" Cardioid Condenser Microphone with SMR Shockmount

Rode NT1 Overview

The NT-1 KIT 1" Cardioid Condenser Microphone from RODE includes the Rode NT1 cardioid condenser microphone, an SMR premium shockmount with Rycote Lyre suspension, and a microphone dust cover. The kit can be used to capture audio for vocalist and instruments in recording studio applications, and more.

While the body of the NT-1 still resembles the NT1-A, the mic has been completely redesigned except for the mesh grille. The large-diaphragm cardioid condenser microphone features RODE's updated HF6 capsule that is designed to provide a detailed midrange response with smooth highs and a warm bass. The HF6 capsule is suspended inside the microphone using Rycote's industry-leading Lyre system to help reduce vibration and handling noises. Also, with self-noise measured at only 4.5 dBA, the NT1 is a very quiet microphone.

The body of the mic is machined from nickel-plated aluminum and is then coated in a ceramic layer, which is electrostatically applied for a scratch-resistant finish. The NT1 includes the SMR shockmount and has a 1-year limited warranty that extends to 10-years after registration with RODE.

  • Large 1" condenser capsule with gold-plated membrane
  • Cardioid polar pattern
  • Internal Rycote Lyre-based capsule shockmounting system
  • Ultra-low noise, self-noise of only 4.5 dB (A)
  • State-of-the-art surface mount electronics
  • SMR Shockmount features double-Lyre suspension system to reduce vibration noise
  • 10-year extended warranty when you register your microphone
RM1393.00
Stock available
more info
Rode NT-USB USB Microphone
Rode NT-USB USB Microphone

Rode NT-USB Overview

The NT-USB USB Microphone from Rode is a cardioid, side-address USB microphone that is capable of capturing audio in up to 16-bit / 48 kHz resolution. It has an integrated headphone amplifier and 1/8" stereo headphone jack that allows for monitoring. The on-mic Direct Mix Control allows you to select between mic input and source input for monitoring.

The NT-USB is compatible with the use of an optional camera kit. Included with the mic are a pop shield, a tripod desk stand, a ring mount, a 20-foot long USB cable, and a storage pouch.

  • 3.5mm stereo headphone jack for zero-latency monitoring
  • Direct mix control between mic input and source output
  • Compatible with Apple iPad with optional camera kit
  • Cardioid polar pattern
RM1063.00
Stock available
more info
Rode NT1 + Ai-1 Complete Studio Kit
Rode NT1 + Ai-1 Complete Studio Kit

Rode NT1 Overview

The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio or while on the go.

  • AI-1 Studio-Quality USB Audio Interface

    The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4" input with phantom power, two balanced 1/4" monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

    The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

    • Desktop USB audio interface with low-noise Class-A discrete preamplifier
    • Sampling rate of up to 96kHz/24-bit
    • One combo XLR-1/4" combo input
    • Two balanced 1/4" monitor outputs
    • One discrete, studio-quality headphone output
    • Phantom power for condenser microphones
    • Zero-latency monitor mode
    • USB bus powered
    • USB Type-C connector for future proof operation
    • Rugged body with Satin Black Finish
    • Class compliant—no drivers required
    • Includes Ableton Live Lite
    • Includes USB cable
RM1807.00
Stock available
more info